CYP CDPW-K1, Руководство по эксплуатации

Страница: 31 / 48

25
6.4.10 Network Settings Tab
This tab provides controls to change the network settings for the unit. You
can manually set the IP address, netmask and gateway address in “Static IP”
mode, or you can obtain an IP address automatically by enabling DHCP.
1) Network Settings: IP mode may be switched between Static IP or
DHCP. In Static IP mode the IP, netmask and gateway addresses may
be manually set. When in DHCP mode, the unit will attempt to connect
to a local DHCP server and obtain IP, netmask and gateway addresses
automatically. Please press “Save” after making any changes to the IP
configuration or mode. To return all network settings to their defaults,
press the “Network Reset” button.
Note: If the IP address is changed then the IP address required for
WebGUI/Telnet access will also change accordingly.