CYP CDPW-K1, Руководство по эксплуатации

Страница: 23 / 48

17
6.4.4 Device Settings Tab
This tab provides controls to enable/disable or add/remove standard network
connected devices to be used as the interface target for a macro command.
Up to 16 devices can be defined for easy use with commands. The name
of each device can be up to 24 characters long (spaces are not allowed).
A valid IP address and network port are required for each device. These
settings are directly linked to any associated macro commands.
1) Active: Once a device has been defined, it can be enabled or disabled
as an available target device by clicking on the button.
2) Edit Device: Clicking on the “Edit” button opens up the Edit Device
window. Here the target device’s name, IP address and Telnet port can
be set. Click on “Save Change” to save the device’s configuration.