CYP CDPW-K1, Руководство по эксплуатации

Страница: 10 / 48

4
6.2 Rear Panel
DC 5V
+
R1
R2
CONTRO
L
RELA
Y
OU
T
-
+
-
1 2 3
CONTROL
DC 5V
- +
RELAY
OUT
2 3 1
1
CONTROL Port: Connect to an active Ethernet network via a switch
or router to allow it to control other devices on the network and to be
accessed via Telnet/WebGUI.
Note: If the connected network switch supports the IEEE 802.3af PoE
(Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet connection.
2
DC 5V 2-pin Terminal Block: Plug the 24V DC power adapter into this
port and connect it to an AC wall outlet for power.
Note: Optional, not required if the unit is powered via PoE.
3
RELAY OUT Terminal Block(s): Connect to devices that can be
powered and controlled via a DC 0~24V/5A relay connection.