CynkoMet T-169/1, Инструкция по использованию и эксплуатации

Страница: 43 / 144

Cynko Met
T-169
Page
43

Inspect the technical state of the flexible hydraulic hoses.

Check the technical condition of pneumatic cables.
 Make sure that there are no leaks of hydraulic oil.

Check the electric lamps of lighting.

Control the markings on the machine (according to Table 1)
4.3.1.2 Preparation of the trailer for the first connection.
Preparation

Check all lubrication points of the trailer, if necessary, lubricate the
machine.

Check for proper tightening of nuts fixing the driving wheels.

Dehydrate the air tank in the brake installation.
 Make sure that the pneumatic, hydraulic and electrical
connections in the agricultural tractor comply with the
requirements, otherwise do not connect the trailer.

Adjust the height of the drawbar location in the trailer with the
drawbar spring, or the position of the upper transport hitch in the
tractor.
NOTE!
NOTE!
Before each maneuver of reversing and unloading the
material loaded on the loading crate, it is
recommended to use the beep signal 2 times in the
tractor in order to inform bystanders about the threat.
NOTE!
NOTE!
Presence of third parties between machines is
absolutely prohibited at the time of aggregation of
the trailer to the tractor. Failure to follow these
instructions and performing the maneuver incorrectly
can lead, in extreme cases, to death of the person
who is between the spreader and the tractor