CynkoMet T-169/1, Инструкция по использованию и эксплуатации

Страница: 21 / 144

Cynko Met
T-169
Page
21
wall. Make sure that all walls and superstructures are properly
closed. Check for proper mounting of the clamping cables.
 Prior to each trailer's use, check its technical condition, especially
in terms of safety. In particular, check the technical condition of
the coupling system, drive system, brakes and signaling lights and
hydraulic, pneumatic and electrical connection elements.

Before driving, check that the parking brake is released and the
braking force regulator is set to the correct position (concerns
pneumatic systems with a manual, three-position regulation).

The trailer is adapted for driving on slopes up to
8°
. Moving the
trailer through grounds with steeper slopes may cause the trailer
to tip over as a result of loss of stability.

Each time, after finished work, drain the air reservoir in the
pneumatic installation. During frosts, freezing water may cause
damage to pneumatic system components.

The cargo protruding beyond the outline of the trailer should be
marked in accordance with the rules of the traffic.
 It is prohibited to exceed the admissible trailer load. Exceeding the
carrying capacity may lead to equipment damage, loss of stability
while driving, scattering of the load and cause a hazard to third
parties. The brake system of the machine has been adapted to the
total weight of the trailer, which if exceeded will result in a drastic
reduction in the effectiveness of the brake.

The load on the trailer should be distributed evenly and must not
impede driving the set. The load must be secured so as not to
have the ability to move or fall over.

When reversing, it is recommended to use the assistance of
another person. During maneuvering, the person helping must
keep a safe distance from the danger zones and at all times be
visible to the operator of the tractor.