CynkoMet T-169/1, Инструкция по использованию и эксплуатации

Страница: 85 / 144

Cynko Met
T-169
Page
85
No. on
Fig. 14
Place of lubrication
Number of
lubrication
points
Lubrica
nt type
The frequency
and method of
lubrication
12
Hinges extensions
8
Solid
grease
Once a month,
lubricate the
swivels.
13
Spring feathers
4
Solid
grease
Every 6-8
months
14
The levers of the
lower walls locks
3
Solid
grease
Every 3-4
months.
15
Wall hinges
10
Solid
grease
Every 3-4
months.
Before commencing the lubrication of the grease fitting, the
greased surfaces and places nearby lubrication points must be
thoroughly cleaned of mud and dust. The grease should be
injected in the grease fitting until release of fresh grease in the
gaps between the mating parts.
6.8 Storage and maintenance.
After ending operation, the trailer must be carefully cleaned
and washed with a stream of water, and then left it in a dry and
ventilated area. In the event of failure of these actions on the zinc
coating, dark and light gray areas (spots) may occur, which do not
constitute grounds for complaint if the zinc coating still has the
required minimum thickness (PN-EN ISO 1461: 2000). In the case
of damage of the external paint coating, the damaged areas must
be cleaned of rust and dust, degreased, and painted retaining the
same color and uniform thickness of the protective coating. Until
painting, the damaged areas should be covered with a thin layer
of grease or anticorrosion preparation.
During a long break in the use of the trailer, it is desirable to
place it indoors or in a covered, ventilated place. It is also
advisable that the metal parts not coated with paint are secured