CynkoMet T-169/1, Инструкция по использованию и эксплуатации

Страница: 63 / 144

Cynko Met
T-169
Page
63

when unloading to the left side - the swivels 1 and 3 from
the right side of the trailer,
 when unloading to the right side - swivels 2 i 4 from the
left side of the trailer.

Check that the swivels on this side of the trailer to which the
unloading will be made are properly established.

If the unloading is done by tilting the load box to the side,
unfasten the cords fastening the side walls and side extensions.

Open or close the lower locks or the wall locks on the side of the
trailer, to which the unloading will take place.
 Cause tilting of the load crate by raising it with a telescopic
cylinder. Previously, you should position the lever of the shut-off
valve of the hydraulic system, which is at the front of the trailer to
position "1".
NOTE!
NOTE!
Before tipping the load box, check whether
the walls or dump window on this side of the
trailer to which the tipping will be performed
are open, and if the wall fastening cords are
unfastened if the load box is to be tipped to
the side.
Tilting the load crate with closed walls or
dump window can damage the trailer!
Tilting the load box without unfastening the
cord connecting the walls may damage the
trailer!
After unloading:

leave the loading crate,

Clean the edges of the floors and walls.