CynkoMet T-169/1, Инструкция по использованию и эксплуатации

Страница: 48 / 144

Cynko Met
T-169
Page
48
yellow socket in the tractor, and then the plug marked in red to
the red socket in the tractor. When you connect the second cable,
the brake release system will switch to the normal mode of
operation (disconnection or interruption of the air duct causes the
trailer control valve to automatically switches to the position of
actuating the brakes of the machine). The cables are marked with
colored protective caps that identify the correct cable installation
In order to disconnect the trailer from the tractor, perform
the following steps:

Stop the trailer, turn off the engine and remove the keys from the
ignition.

stop the tractor with a manual parking brake.

if a trailer with cargo is located on a steep slope or an elevation, it
should be protected additionally against rolling by planting chocks
under rear wheels.

disconnect the hydraulic, electrical and brake system cables of the
trailer from the tractor

when removing the pin, disconnect the drawbar from the tractor
transport hitch and drive the tractor away.