CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 89 / 148

Cynko Met
T-149
89
do not have the possibility of moving, and the trailer when
moving is not tilting. If there is a possibility of damage or
frayed belts against components of the trailer, put washers in
sensitive areas.
In order to avoid compression of the walls inside the
trailer, when loading using a crane, use a special traverse, in
which the places of hooking the belts are spaced wider than
the total width of the trailer.
The trailer should be attached firmly to the platform of
the transport mean with belts, chains, lashing or other
fastening means fitted with a tightening mechanism. The
fasteners should be hooked in the designated eyebolts Fig.21
or permanent structural elements of the trailer (cross-braces,
crossbars, etc.). Transport handles are welded to the chassis of
the top frame, one pair on each side of the trailer. Use certified
and technically efficient fastening means. Frayed belts, cracked
mounting brackets, opened or corroded hooks or other
damage may disqualify the given mean for use.
Under the wheels of the trailer chocks, it is advisable to
put wooden beams or other elements without sharp edges,
preventing the machine from rolling. Trailer wheels chocks
must be attached to the loading platform of the car so as to
prevent their shifting.
CAUTION!
CAUTION!
During car transport, the parking brake should
be used in the trailer (parking brake action is
described in section 4.2.4).