CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 38 / 148

Cynko Met
T-149
38
CAUTION!
CAUTION!
The reciprocal shut-off valve (p. 14 Figure 7)
limits the angle of the declension of the load box
when tilting it backwards and sideways. The
length of the cable controlling that valve is
adjusted by the manufacturer and should not be
adjusted during operation of the trailer.
4.2.4 Brake system
The trailer is equipped with a braking system comprising of:

a pneumatically controlled brake, acting on four wheels of the
rear and the front axle,

a parking brake actuated manually by means of a crank
mechanism on the side of the trailer, acting on the rear
wheels.
The pneumatic brake is activated from the workplace of the
tractor driver by pressing the brake pedal of the tractor. The
construction of this brake provides automatic inhibition of the
four driving wheels of the trailer with an unexpected
disconnection of the pneumatic trailer and tractor. The used
valve has a brake release system used in the case when the
trailer is disconnected from the tractor (fig. 10).
The braking force 3 regulator located in the suspension
system (fig.9) (fig.10) is controlled manually. Depending on the
load of the trailer with cargo, the control lever must be set in
one of three positions:
 position "0" - for an unladen trailer,

position "1/2" - for the trailer partially loaded,
 Position "1" - for the trailer fully loaded.