CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 73 / 148

Cynko Met
T-149
73
crate support and slowly lower the loading crate direct the
support to the socket.
The loading crate cannot be loaded. The trailer must be
connected to the tractor and secured with chocks and
locked with a parking brake.
6.1 Regulation of driving wheel bearings
backlash.
In a newly purchased machine, after the first 100 km,
while during further use - after driving another 1500- 2000 km
- check and if necessary adjust the backlash of the wheel
bearings. To do this you need to:

Connect the trailer to the tractor, set such a set on a hard
surface in the direction of driving straight ahead (front axle of
the trailer may not be twisted)

Brake the trailer.

Place the blocking wedges under the wheels of a trailer, raise
the trailer wheel on the opposite side of the wedges so that
the wheel does not touch the ground and secure it from
falling.

Check the backlash:

By turning the wheel slowly in both directions,
check that movement is smooth, and if the wheel
rotates without excessive resistance and jams

Spinning the wheel so that rotates very quickly,
check that the bearings do not make unnatural
sounds.

Moving the wheel, try to feel the backlash.

Repeat for each wheel individually, remembering
that the lift must be on the opposite side of the
wedges