CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 85 / 148

Cynko Met
T-149
85
actions on the zinc coating, dark and light gray areas (spots)
may occur, which do not constitute grounds for complaint if
the zinc coating still has the required minimum thickness (PN-
EN ISO 1461: 2000). In the case of damage of the external
paint coating, the damaged areas must be cleaned of rust and
dust, degreased, and painted retaining the same color and
uniform thickness of the protective coating. Until painting, the
damaged areas should be covered with a thin layer of grease
or anticorrosion preparation.
During a long break in the use of the trailer, it is
desirable to place it indoors or in a covered, ventilated place. It
is also advisable that the metal parts not coated with paint are
secured with an anti-corrosion preparation of temporary
protection or a layer of grease. During a long break in the use
of the trailer it cannot be loaded.
6.9 Troubleshooting.
Table 5. Faults and remedies
Fault Reason Way of removal
Problems with
moving
Unconnected hoses
Of the brake
installation
Connect the brake
hoses
launched parking
brake
Release the parking
brake.
Damaged
connection cables of
the pneumatic
system
Exchange.
Connections leakage
Tighten, replace
washers or seal sets,
replace the cables.
Damaged control Check the valve,