CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 49 / 148

Cynko Met
T-149
49
When connecting the braking system (two-wire
pneumatic), the correct sequence of connecting cables is
important Be the first to connect the plug marked yellow to a
yellow socket in the tractor, and then the plug marked in red
to the red socket in the tractor. When you connect the second
cable, the brake release system will switch to the normal mode
of operation (disconnection or interruption of the air duct
causes the trailer control valve to automatically switches to the
position of actuating the brakes of the machine). The cables
are marked with colored protective caps that identify the
correct cable installation.
In order to disconnect the trailer from the tractor,
perform the following steps:

After stopping the tractor, brake the trailer with a parking
brake.

If a trailer with cargo is located on a steep slope or an
elevation, it should be protected additionally against rolling by
planting chocks under rear wheels.

Disconnect the hydraulic, electrical and brake system cables of
the trailer from the tractor

When removing the pin, disconnect the drawbar from the
transport hitch of the tractor and drive the tractor away.