CynkoMet N-235 Series, Инструкция по использованию и эксплуатации

Страница: 50 / 124

Cynko Met
N-233
50
prevailing road conditions, machine load, type of cargo and other
conditions.
•
During travel on public roads the spreader must be marked with a plate
distinguishing slow-moving vehicles, placed on the drum guard or deflector
(Fig. 3).
•
The operator of the tractor is obliged to equip the spreader with a certified
or homologated sign distinguishing slow-moving vehicles in accordance
with applicable regulations of the country in which it is driven.
•
When driving, observe the traffic rules, signal the change of direction with
the help of indication,
•
The lighting and signaling installation should be kept clean and it is advised
to take care of its technical condition.
• Damaged or lost lighting and signaling elements are to be immediately
repaired or replaced.
• Avoid ruts, depressions, ditches or driving on shoulders of the road. Driving
through such obstacles can cause sudden tilting of the spreader and tractor.
This is particularly important because the center of gravity of the loaded
spreader adversely affects driving safety. Driving near the edge of ditches or
canals is dangerous because of the risk of landslides under the wheels of the
spreader or tractor.
•
The driving speed must be reduced sufficiently in advance before
approaching turns or unevennesses and inclines in the terrain.
•
When driving avoid sharp corners, especially on slopes.
•
Please note that the braking path of the set increases significantly as the
weight of the carried cargo increases and as speed increases.
•
Control the behavior of the spreader while driving on uneven terrain, and
adjust the speed to terrain and traffic conditions.
•
The spreader is adapted for driving on slopes of maximally up to 8
o
.
Moving the spreader over steeper slopes may cause the machine to tip
over.
• When driving down slopes with a loaded spreader, speed must be reduced.
4.3.8 Unloading of the crate serving as a transporter.
Before unloading the loading crate of the spreader / transporter you
should:
▪
check that the area around the spreader / transporter is safe,