CynkoMet N-235 Series, Инструкция по использованию и эксплуатации

Страница: 16 / 124

Cynko Met
N-233
16
•
Before you start, check if the spreader has any loose parts.
•
Within additional elements which are force operated (e.g. by hand), there
are places of crushing and shearing.
•
Malfunctioning of the machine should be removed only during absolute
motionlessness of the machine and
disconnection of the PTO from the
tractor.
•
The presence of persons between the tractor and spreader is prohibited
until the vehicle is secured against rolling by means of the parking brake
(“handbrake”) and wedges under the wheels.
•
The permissible transport speed 30 km / h cannot be exceeded.
•
It is forbidden to transport people or animals on the spreader.
•
It is forbidden to enter into the loading platform during operation and when
coupling the tractor with the spreader.
•
The machine is designed to work on slopes up to 8 °.
•
Decoupling of the spreader from the tractor is not allowed while the engine
is running and the key has not been removed.
•
Modifications can be made only with the permission of the manufacturer.
The basic condition for safety are original spare parts and components.
Using other parts may result in exclusion of liability of the manufacturer for
resulting consequences.
•
Careless operation and use of the spreader may injure the operator or third
parties and damage the tractor-spreader set.
•
It is forbidden to use the machine by persons not qualified to drive
agricultural tractors, including under aged persons and persons under the
influence of alcohol.
•
It is forbidden to use the spreader in non-compliance to its purposes. The staff
operating the machine should strictly observe basic occupational health and safety
rules.
•
Prior to every use of the spreader, check its technical condition, especially the
condition of the coupling system, drive system, brake system and light signaling
system.
•
The machine is marked with information and warning inscriptions in the form of
stickers as specified in table no. 2. The user is obliged to constantly take care of the
readability of signs and warning symbols on the machine. In the event of damage
or destruction replace them with new ones. Labels with inscriptions and symbols
are available from the manufacturer.