CynkoMet N-235 Series, Инструкция по использованию и эксплуатации

Страница: 34 / 124

Cynko Met
N-233
34
4.3 Rules of proper use of the spreader.
4.3.1 Preparation before running for the first time.
4.3.1.1 Control of the spreader after delivery
The manufacturer guarantees that the spreader is fully operational
and complete, and has been checked according to quality control
procedures on site and is approved for use. However, this does not relieve
the user from the obligation of checking the vehicle after delivery and
before first use.
Before starting work, the operator of the spreader must:
•
Inspect the machine's technical condition and prepare it for first start-
up.
•
Read the contents of these instructions, attached to the spreader, and
adhere to the recommendations given therein.
•
Learn the machine's design and principle of operation.
NOTE!
NOTE!
Before connecting and before starting the spreader, read this
manual and follow the instructions contained therein.
External visual inspection:
•
Check the completion of the machine (standard and optional equipment).
•
Check the condition of the anti-corrosion coatings.
•
Check all individual components of the spreader for mechanical damage
(dented, bent or broken parts) arising from improper machine transport.
•
Check the condition of tires of the driving wheels and the air pressure in the
tires (Tab. 4, section 4.1).
•
Inspect the technical state of the flexible hydraulic hoses.
•
Check the technical condition of pneumatic cables.
•
Make sure that there are no leaks of hydraulic oil.
•
Check the electric lamps of lighting.
•
Check markings on the machine - pictograms (Tab. 3).
4.3.1.2 Preparing the spreader for the first connection.