CynkoMet N-235 Series, Инструкция по использованию и эксплуатации

Страница: 36 / 124

Cynko Met
N-233
36
•
set travel speed (fig. 9). Remember that only the first 3 holes for
unloading (item 3, fig. 9) serve for spreading. The last two holes, with
the greatest speed, serve for unloading when the spreader is set up
for work as a self-dumping transporter.
•
start the tractor and disengage the parking brake
•
move the whole set by a few meters.
•
open the hydraulic wall (check the proper up / down operation), leave
in an open position.
•
engage PTO revolutions - revolutions of the adapter's drums and
conveyor’s feed rate.
•
in the event of improper feeder feed rate, set the adjusting lever to
the proper position (fig. 9). Feed rate is changed by switching the
lever from neutral position (item 2, fig. 9)
– the closest holes (item A,
fig. 9) correspond to the lowest speed, and the farthest - the highest
speed (item B, fig. 9).
Figure 9. Conveyor’s adjusting lever.
Directions of conveyor movement and lever position:
•
holes item 1 - forward conveyor movement (loading),
•
holes item 2 - neutral position (no feed),
•
holes item 3 - reverse conveyor movement (unloading),
•
A – slow feed rate, B – fast feed rate;
B B
A
A