CynkoMet N-235 Series, Инструкция по использованию и эксплуатации

Страница: 61 / 124

Cynko Met
N-233
61
NOTE!
NOTE!
It is essential, before every use of the spreader, to check the
tightness of screws. Failure to perform this activity may lead to
severe damage to the machine or injury to persons found in the
proximity of the running machine.
NOTE!
NOTE!
Absolutely use the original drums and blades. Failure to do so
rules out the manufacturer's liability with regard to the warranty
and to the safety of the machine’s use.
6.8 Operation of the floor conveyor
Works related to conveyor maintenance are based on:
•
checking the front and rear socket wheels for cracks, visible damage
and hazardous pollution,
•
checking the condition of the chain, support points and bearings of
conveyor parts, and whether there is visible damage,
•
checking whether “scrapers” for self -cleaning of socket wheels are
positioned centrally in the channel of a socket wheel and have no
visible damage or wear.
•
checking the condition and proper tension of the chain.
This check is based on raising the chain at the center of its length from
the top upwards (on an area of floor), and determining the height of raising:
- if this height exceeds 100 mm and the tensioner is able to slide,
adjust the chain’s tension by fastening the nut on the tensioner.
- if the height of 100 mm is exceeded and there is no space for sliding
of the tensioner, shorten the conveyor’s chain by 2 links.
Shortening of the chain is based on:
• unlatching the coupling link of the chain,
•
taking away 2 links so that the final link is in horizontal position
(with its hole facing up),
•
re-coupling the chain using the coupling link.