CynkoMet N-221/3-3, Инструкция по использованию и эксплуатации

Страница: 56 / 119

Cynko Met N-221/3-3
N-221/4-3
56
6. Technical Support
When using the spreader, constant monitoring of the technical condition
and the execution of maintenance procedures that will keep the machine in
good condition is needed
Technical condition. Therefore, the user of the spreader is obliged to perform
all maintenance and regulatory tasks specified by the Manufacturer.
In order to function properly and to avoid serious failure of the spreader, it
must be kept in good technical condition, repaired on time and reasonably
exploited (operation within the technical parameters of the spreader).
An important element of the operation is the daily maintenance of the
spreader (before commencing work), it foresees:

Control of tightening the screw connections and securing them against
unauthorized untightening (table of screw tightening torques),

Checking the tightness of the hydraulic system

Checking the tightness of the pneumatic system,

Checking the correct operation of mechanisms (conveyor feed).

Check the functioning of the brake system,

Check the functioning of the electrical system,

Checking and performance of lubrication, as indicated by the instructions,

Checking the tire pressure,

checking the wall and extensions lock - whether they are properly closed and
secured and there is no risk of spontaneous opening
Any faults detected should be removed on a regular basis, use of the
spreader even with a slight failure could have serious consequences.