CynkoMet N-221/3-3, Инструкция по использованию и эксплуатации

Страница: 41 / 119

Cynko Met N-221/3-3
N-221/4-3
41
screws, safely take off the adapter and leave in the destination place.
Installation of the rear hydraulic wall is to be started by screwing
the brackets to the side walls, then mount brackets on the wall and unblock
with the swivels which we secure with pins. Check the correct assembly of the
details and then mount the cylinder rod on the swivels of the rear wall and
secure with pins.
4.3.3 Loading the spreader.
Loading of the spreader should take place after proper
connection to the tractor, with the tractor engine off and the
handbrake used in both the tractor and the spreader. The loading
should be carried out when the spreader stands on a horizontal plane
and stable ground. Then, the loading itself may be carried out with
additional machines (e.g. a tractor with a front loader), and the loader
itself must be carried out in such a way that the material loaded on the
loading crate is spread in an even way. The goal of the uniform
loading is to optimize the dispersion of the material during operation
of the spreader.
CAUTION!
CAUTION!
It is absolutely required from the user to verify whether the
material loaded on the spreaders are not solids such as stones,
pieces of wood, metal parts, wires, etc .. Failure to do so may
result in permanent damage to the structure of the machine and
void the warranty, and what is worse impact of such elements
on bystanders or animals.
4.3.4 Connecting and disconnecting with the tractor.
The spreader can be connected to the agricultural tractor, if all
connections (electrical, pneumatic, hydraulic), and the hook in the agricultural