CynkoMet N-221/3-3, Инструкция по использованию и эксплуатации

Страница: 44 / 119

Cynko Met N-221/3-3
N-221/4-3
44
and rods, the cabin of the tractor must be closed to prevent it
from unauthorized access. The tractor engine is to be turned off
and remove the key from the ignition.
CAUTION!
CAUTION!
Pay attention to the compatibility of oils in the tractor hydraulic
system and the hydraulic system of the spreader.
4.3.5 Loading the crate.
CAUTION!
CAUTION!
Loading of the crate can take place only when the spreader is
connected to the tractor, set on level ground with the drawbar
directed to drive forward and handbrake used on the tractor and
trailer.
You should aim for even distribution of the load in the loading crate which has a
significant impact on the uniformity of dispersion of the material located on the
spreader. When loading or unloading the spreader, it is recommended to use a
crane, loader or a conveyor according to general safety rules. Before loading, check
that all the moving parts are closed (locks, guards, etc.)
Lightweight, volumetric materials may be loaded even above the crate
extension however, up to 5cm of the loading, with particular attention to the stability
of the spreader.
Regardless of the type of the load carried, the user is required to secure
it in such a way that the load is not able to move freely and cause
contamination of the road. If this is not possible, it is prohibited to transport
such cargo.
Due to the varied density of the materials, the use of the total capacity of the
container may result in exceeding the permissible load of the spreader.
The approximate permissible heights of loading layers of various materials and
their bulk weights are given in Table 3.