CYBEX 530C Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 88

background image

SERIOUS INJURY COULD OCCUR

IF THESE PRECAUTIONS

ARE NOT OBSERVED

1. Do not exceed maximum monitor
weight of 25 lbs./11.4 kg.
2. Do not exceed maximum monitor
case width of 19"/48 cm.
3. Do not use monitor support bracket
to move unit.

DE-18783-4

WARNING

Cybex 530C and 530R Owner’s Manual

Safety

Page 1-3

Cycles containing the A/V options

•

Devices connected to Cybex equipment must comply with appropriate safety standards. This

includes but not limited to: (UL-60601, IEC/EN 60601-1) for medical equipment.

•

There must be adequate mechanical mounting of the device in all combinations (configurations).

•

The device must be stable on the unit in all configurations.

•

Risk and leakage current of the final combinations must comply with IEC/EN 60601-1-1 and is the

responsibility of the end user to ensure compliance.

•

Electromagnetic emissions and immunity of all configurations must conform to IEC/EN 60601-1-2.

•

All added devices must have a compatible interface.

•

All devices must be used for their intended purpose.

•

Signal or mains isolation devices and additional protective earth may be needed to assure

compliance with IEC/EN 60601-1-1.

•

Do not power the entire system from a single outlet or power strip. If the unit is used with the

optional power supply, ensure that this power supply is plugged in to a separate outlet than any

connected device, to prevent exceeding the allowable leakage current of the system.

•

End user of a system shall ensure that interruption and restoration of the power supply to any

equipment or non-medical equipment of the system shall not result in a safety hazard other than

interruption or cessation of its intended function.

Carefully read and understand all warning decals before using the unit.

NOTE:

To replace any worn or damaged decals do one of the following:

Visit www.cybexinternational.com to shop for parts online, fax your order to 508-533-5183 or contact
Cybex Customer Service at 888-462-9239. If you live outside of the USA, call 508-533-4300.

Warning Decals

Warning Decals - A/V Option

Warning decal
part number
DE-18783-4

«
...
11
12
13
14
15
...
»

Содержание 530C

























































































Отзывы:

Нет отзывов

Похожие инструкции для 530C

Бренд: Pro-Form Страницы: 24

Бренд: Sunny Страницы: 13

Бренд: Sunny Страницы: 6

Бренд: Interactive Fitness Страницы: 8

Бренд: Precor Страницы: 56

Бренд: Weslo Страницы: 12

Vector 303 Bike

Бренд: Weslo Страницы: 16

Бренд: Weslo Страницы: 16

Pursuit T 39 Exercise Bike

Бренд: Weslo Страницы: 16

Pursuit upright

Бренд: Weslo Страницы: 24

Бренд: Diadora Страницы: 71

Бренд: Kettler Страницы: 32

Бренд: Kettler Страницы: 36

Бренд: Kettler Страницы: 48

Бренд: REX Страницы: 120

Бренд: HSE24 Страницы: 24

Бренд: Ironman Fitness Страницы: 31

Бренд: Orbit Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды