520055-07-SPC
6
FCC Part 68 Regulations require that the following information be provided to the customer:
Product:
MultiTech Systems modem module
Model:
MT5634SMI
FCC Registration Number:
AU7-USA-25814-M5-E
1.
This equipment complies with Part 68 of the FCC rules. On the side or bottom of this equipment is a label that contains, among
other information, the FCC Registration Number and Ringer Equivalence Number (REN), if applicable, for this equipment. If
required, this information must be given to the telephone company.
2.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected
to the telephone network or premises wiring using a compatible modular jack that is Part 68-compliant. See installation instructions
for details.
3.
If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service
temporarily. If possible they will notify you in advance. But if advance notice isn’t practical, you will be notified as soon as
possible. You will be advised of your right to file a complaint with the FCC.
4.
Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper
operation of your equipment. If they do, you will be given advance notice to give you an opportunity to maintain an uninterrupted
service.
5.
If you experience trouble with this equipment, please contact AT&T Global for repair/warranty information. The telephone company
may ask you to disconnect this equipment from the network until the problem has been corrected or until you are suer the
equipment id not malfunctioning.
6.
This unit contains no user-serviceable parts.
7.
The FCC recommends that the AC outlet to which equipment requiring AC power is provided with and AC surge arrestor.
8.
The REN is ude to determine the quantity of devices which may connected to the telephone line. Excessive RENs on the
telephone line may result in the devices not ringing in response to an incomming call. In most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total
RENs, contact the local telephone company.
9.
The following information may be required when applying to your local telephone company for leased line facilities.
Service Type
REN
USOC
Analog
0.3B RJ-11C
Canadian Equipment Limitations
NOTE:
The Industry Canada Certification label identifies certified equipment. This certification means that the equipment meets certain
telecommunications network protective, operational and safety requirements. The Department of Commerce does not guarantee the
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the
company’s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly
(telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs
or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal
metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
WARNING
–
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection
authority, or an electrician, as appropriate.
The load number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop
that is used by the device, to prevent overloading. The termination on a loop may consist of of any combination of devices subject only
to the equipment that the total of the LNs of all devices does not exceed 100.
The ringer equivalence number (REN) assigned to each terminal adaptor is used to determine the total number of devices that may be
connected to each circuit. The sum of the RENs from all devices in the circuit should not exceed a total of 5.0.
Содержание SG565
Страница 16: ...520055 07 SPC 1 Product Compliance Information...
