User Manual
–
VisiTouch Series
VisiTouch series
–
User Manual
A
PR
.
2020
V1.1
24/45
Extra bending parameters can be found on this page, which displays parameters related to
the part, and depending on the VisiTouch configuration and the type of action performed,
also displays various settings for the current bend. Most of these parameters can also be
found in the
Material
This is not a sequence parameter, but of course a part parameter.
Each touch on the material’s name selects the next available from
the list of
Material thickness
The default thickness, defined in
, is automatically
displayed when changing material. It is however possible to change
it simply by touching this icon.
If on the other hand, the parameter
Predefined thickn.
is set to
yes
, a touch on
this icon will open a numerical pad as show to
the right, where the operator will be able to
select directly one of the predefined
thicknesses.
This is a part parameter.
Extra Bending
Parameters
Predefined thickness
Touch here to manually
insert a thickness
