User Manual
–
VisiTouch Series
VisiTouch Series
–
User Manual
A
PR
.
2020
V1.1
15/45
•
Predefined thickn.
: Allows defining up to 7 different predefined thicknesses for
the selected material.
•
Thickness min/max
: Determines the maximum and minimum accepted thickness
for the selected material.
Three predefined default materials are available (steel, stainless steel, aluminium), but
others can be added.
To add a material:
1.
Touch
Material
and select a non-configured material (Mater X) from the list.
2.
Enter the new material’s characteristics.
3.
Touch the name (Mater X) to display the keyboard and enter the name of the new
material.
This parameter allows the operator to apply a permanent correction to the Bottom Dead
Centre position.
Please note that this correction is always applied and is NOT shown in the
correction page. If you experience big differences from what you expect to get,
maybe check the value of this parameter.
This parameter allows the operator to choose on which side
–
Left
of
Right
–
he prefers to
have the side bar containing the
.
This parameter allows the operator to choose if he prefers to have the menu displayed at
the
Bottom
or at the
Top
of the screen when he presses the
.
BDC Correction
Menu horizontal
alignment
Menu vertical
alignment
