User Manual
–
VisiTouch Series
VisiTouch series
–
User Manual
A
PR
.
2020
V1.1
36/45
S
ETTING INSTRUCTIONS
:
1.
Touch the bend sequence calculation button
. Once the sequence is
calculated, the Bend 2D screen is displayed.
Pressing the back
button will erase the last bend in the sequence. If you wish to
delete all bends, simply touch the
button.
2.
Immediately after determining the last bend to be selected, the Bend 2D screen
here below is displayed.
3.
In the Bend 2D page, the operator must determine the back gauge and part
position for each bend, and if necessary Extra Bending Parameters.
4.
Press
and select
Bend num page
5.
Start the hydraulic pump motor (by pressing this button
if available. It turns
red when the motor is running).
6.
Press the
button to position the machine according to the data that were just
entered.
7.
When the machine is ready to bend, a
button is displayed.
8.
If you want to repeat the same step in order to apply all the necessary corrections
to it, switch to the
9.
Press the foot switch to execute the bend.
Browsing through
the bends
Next gauging point
Switch between
stop or support
gauging
Touch the drawing
to toggle between
Bend Order page
and this one
Extra Bending Parameter
