CXR V.34bis series, Руководство по эксплуатации и установке

Страница: 66 / 150

V.34bis Series Standalone & Rackmount Modems
62
4
Front Panel Configurations
This section describes the front panel operation for the External and
Rackmount modems. The front panel of the External modem has one push
button switch and six red LEDs. Rackmount modems have 12 LEDs; 9
green and 3 red. The LEDs indicate the operating status of the modem.
External Front Panel Operation
ront Panel Button Functions
he front panel "Dial/Disconnect" switch, labeled DL/DIS has several
nctions as indicated below:
F
T
fu
ode
mber stored in memory with the "A" attribute. If there is no
ttribute, the modem will manually originate. If the
hes twice, the modem will manually
•
leased line, pressing the switch will activate leased
P
•
P itch when online, disconnects the modem from the line.
• Configuration Select
Holding DL/DIS for more than 4 seconds will initiate a hardware reset. If
the switch is still pressed after the beeps, the modem will enter
configuration mode. The front panel LEDs indicate which configuration
Command M •
Pressing DL/DIS momentarily in command mode initiates dialing of the first
telephone nu
number with an "A" a
switch is held so that DSR flas
answer. If the switch is held for more than 4 seconds, the modem resets.
Leased Line
If the modem is set for
line training.
coming Ring • In
ressing the switch when an incoming ring is detected causes the modem
to answer the call.
On Line
ressing the sw