CXR V.34bis series, Руководство по эксплуатации и установке, Страница: 103 / 150

AT and V.25bis Command Sets
V.34bis Series Standalone & Rackmount Modems
99
Table 6.2: Details Continued
%Fn Auto Fall Back
FORMAT: AT%Fn
n = 0
- Disabled
n = 1
- (Default) Enabled
%Hn V.22 bis and V.21/103 "HUNT"
Operations
FORMAT: AT%Hn
n = 0
- Disabled
n = 1
- (Default) Enables the V.22 bis hunt operation.
n = 2
- Enables V.21/103 (300 bps) hunt operation.
n = 3
- Enables V.22 bis and V.21/103 (300 bps) hunt operations.
%In Inactivity Timer
FORMAT: AT%In
n = 0
- (Default) Disabled
n = 1
- Transmit data inactivity timer enabled.
n = 2
- Receive data inactivity timer enabled.
n = 3
- Transmit/receive data inactivity timer enabled.
%Ln Leased Line Lookback
FORMAT: AT%L
n
n = 0
-(Default) Disabled.
n = 1
-Enabled.
%Mn Load Non-volatile Memory Bank
FORMAT: AT%Mn
n = 0
- 4 (User configuration number).
%On Leased Line - Originate or Answer
(Leased Line only)
FORMAT: AT%O
n
n = 0
- Leased line answer mode.
n = 1
- (Default) Leased line originate mode.
Note: The S0 register applies only to operation on the dial network.
%PO:sss..s:sss..s Store Operator Password
The "%PO" command stores an operator password in non-volatile memory.
The operator password is a user-defined string used to control access to the
modem. The password can be up to 12 characters in length. When storing
an operator password the string must be entered twice on the command line
to ensure that the password is saved correctly. For example:
AT%PO:MAGIC:MAGIC
would define the operator password to be the word "MAGIC". The
command: AT%PO would clear the currently stored operator password.