CXR V.34bis series, Руководство по эксплуатации и установке

Страница: 43 / 150

Modes and Configurations
V.34bis Series Standalone & Rackmount Modems
39
Disconnecting From The Telephone Line
There are several ways to disconnect the modem from the telephone line to
end a call:
> Press the DL/DIS switch on the front panel; RESET on the Fax Modem.
> Enter the escape code (+++) to return the modem to "AT" command
mode, then issue the ATH disconnect code from the DTE.
> If the modem is set to pay attention to DTR (AT&D2 is selected) turn off
DTR from the DTE or turn off the DTE. The modem will sense the On-
to-Off transition of DTR and will disconnect from the line.
> The modem will automatically disconnect if the remote modem
disconnects.
> If a positive value is stored in S-Register 32, the modem will automatically
disconnect from the line if no data is transmitted, received or both
(depending on the AT%In command) after the number of minutes
specified in S-Register 32. Setting S-Register 32 to 0 disables the online
inactivity timer (asynchronous mode only).
> Turn off or unplug the modem from the wall connection.