CXR V.34bis series, Руководство по эксплуатации и установке

Страница: 48 / 150

Modes and Configurations
44
V.34bis Series Standalone & Rackmount Modems
These commands set the operator password to be "USER" and the
supervisor password to be "SUPER" (Please do not use these as
passwords). In addition, the "AT" command security option has been
enabled. The modem will now not allow any "AT" commands until the
operator or supervisor password has been entered.
There are two ways to enter a password:
1. The password can be entered on the "AT" command line by enclosing
it in parentheses. For example:
AT(USER)DT555-1111
2. The "AT" command line can be entered without the password and the
modem will prompt for the password before executing the command.
For example:
ATDT555-1111
Enter password:
The user now enters the correct password and the modem will then dial the
number. The modem will not echo the characters as the password is
entered.
The supervisor password can be entered in place of the operator password
to allow complete access to all commands.
The password is entered only once. Once the
password has been entered it will remain in
effect until either the modem is reset or a
connection is dropped.
Passwords Provide These Controls:
•
Allows access to AT dialer
•
Dialing from memory, viewing stored numbers, changing stored
numbers
•
Changing answerback, operator password, supervisor password
•
Allows down-line loading