20
CONTACT MANUFACTURER FOR COMPLETE PART NUMBERS AND OPTIONS.
REFER TO MANUFACTURER DOCUMENTATION FOR PROPER WIRING OF SYNC MODULES
Table 1
figure 7
3.5.7 Ethernet Connection
This connector can be hooked to the local area network. Exact functions to be determined. Refer to
figure 4 for location.
3.5.8 Telephone Line Jack
This connector can be used when the optional factory installed modem is present. It will allow for
system status information at a remote site. Uploading of site programming information is not allowed
through this connection. Any access through this connection will require password entry. Refer to
figure 4 for location.
3.5.9 RS-232 DB9 Connector
This connector is for uploading or downloading of information such as site programming or alarm
memory. Refer to figure 4 for location.
