CVS SKL 1200 C Series, Руководство по эксплуатации

Страница: 21 / 32

Operating instructions Screw compressor SKL 1200 C
Start-up and operation
21
6
Start-up and operation
6.1 Safety during start-up
See chapter 2.6 Safety!
6.2 Start-up
ATTENTION!
The compressor must always have a sufficient oil
level. Check oil level and top up if necessary. Refer
to rating plate oil on the compressor or chapter 3
Tab. 4 / Tab. 5: Types of gear oil.
Inspection prior to initial start-up The following points must be checked prior to initial start-up:

Transport damage to the compressor

Screw connections for tightness

Oil level (refer to chap. 7.3)
Start-up

Ensure that the compressor is positioned at an acceptable
angle
(see chapter 3 Tab. 1)

Depressurise the pressure side

Open shut-off devices

Switch on drive (engage gently)

Adjust input speed

Check operating data
Inspections during operation During operation the operator has to check the following data
every 20 minutes :

Drive speed (see chapter 3 Tab. 2)

Final overpressure (see chapter 3 Tab. 2)

Gear oil pressure at the compressor (see section 7.3)