CVS SKL 1200 C Series, Руководство по эксплуатации

Страница: 11 / 32

Operating instructions Screw compressor SKL 1200 C
Safety
11
Hazard notes and occupational safety
For your own safety and that of the machine, the following
information must be observed and complied with:
Improper operation
DANGER!
Danger due to improper operation!
– Only use the compressor in a perfect technical
condition. Malfunctions that are relevant for
safety have to be promptly eliminated.
– Conversions of the compressor are not
permissible and can impair safety.
– Before carrying out regular maintenance,
cleaning and repair work, switch off power
supply and secure compressor against
restarting (switch off drives).
– Never bridge any safety equipment or put it out
of operation.
– Any work on the compressor and/or on
electrical equipment must be carried out by
specialised staff.
– Repair and maintenance work may only be
carried out when the compressor is stationary.
For this, the compressor must be secured
against restarting!
– The compressor may not be under pressure or
in a state of vacuum while work is being carried
out on it.
Close shut-off valve on the vehicle side and
vent the pipe between compressor and shut-off
valve or manually relieve excess pressure at
safety valve. Observe pressure gauge!
– The drive's protective equipment may only be
removed when the compressor is stationary and
has to be correctly refitted after completion of
work.
– Only dismantle accidental contact protection
after compressed air system and pressure pipe
have cooled down.
– It is an environmental protection requirement
that any liquids arising during maintenance work
(e.g. oil) must be collected and disposed of in
an environmentally compatible manner.