CVS SKL 1200 C Series, Руководство по эксплуатации

Страница: 27 / 32

Operating instructions Screw compressor SKL 1200 C
Malfunctions
27
8
Malfunctions
This chapter describes possible causes of malfunctions and trouble
shooting tasks.
Reduce the maintenance intervals if similar malfunctions occur
repeatedly due to above-average intensive use so intervals
correspond to the actual load.
Contact the manufacturer in case of malfunctions that cannot be
repaired with the aid of the following information (

page 2)!
8.1 Safety
Refer to chapter 2.6 Safety! Personnel
Personnel

The trouble shooting work described at this point can be
carried out by the operator, unless otherwise indicated.

Some work may only be carried out by specially trained
specialised staff or exclusively by the manufacturer himself.
This is specifically pointed out in the description of the
individual malfunctions.

Only electrical specialists may carry out work on the
electrical system.

Components and parts may only be replaced by specialised
staff.
Personal protective equipment Refer to chapter 7.1.
Environmental protection Refer to chapter 7.1.
Conduct in the case of
malfunctions The following basically applies:
1. Immediately switch off the compressor in case of malfunctions
representing an immediate danger for individuals or material
assets.
2. Switch of all power supplies and secure against restarting.
3. Inform person in charge at the place of installation.
4. Depending on the type of malfunction, have the cause
determined and eliminated by responsible and authorised
specialised personnel.
8.2 Recommissioning after corrective action
After corrective action or trouble shooting:
1. Ensure that nobody is staying in the hazard area.
2.
Start in accordance with the instructions in chapter „start-up“.