Custom Audio Electronics PRT 80, Руководство пользователя

Страница: 80 / 96

3. PRINTER FUNCTIONS
PRT 80 62 3-
blinks and the printer waits for the FEED button to be pressed. After the button is
pressed, the printer executes the macro once. The printer repeats the operation
r times.
[Notes] • This command has an interval of ( t
×
100 msec.) after a macro is executed by t .
• If this command is received while a macro is being defined, the macro definition is
aborted and the definition is cleared.
• If the macro is not defined or if
r is 0, nothing is executed.
• When the macro is executed by pressing the FORM FEED button ( m =1), the paper
cannot be fed using the FORM FEED button.
[Default]
[Reference]
$1D $3A
[Example]
3 6 $ D 1 $
[Name] Print counter
[Format] ASCII GS c
Hex 1D 63
Decimal 29 99
[Description] Sets the serial counter value in the print buffer and increments or decrements the
counter value.
[Notes] • After setting the current counter value in the print buffer as print data (a character
string), the printer counts up or down based on the count mode set. The counter value in
the print buffer is printed when the printer receives a print command or the buffer is full.
• The counter print mode is set using
$1D $43 $30 .
• The counter mode is set using $1D $43 $31 or $1D $43 $3B .
• In count-up mode, if the counter value set by this command goes out of the counter
operation range set by
$1D $43 $31 or $1D $43 $3B it is forced to revert to the minimum
value.
• In count-down mode, if the counter value set by this command goes out of the counter
operation range set by
$1D $43 $31 or $1D $43 $3B it is forced to revert to the maximum
value.
[Default]
[Reference]
$1D $43 $30, $1D $43 $31, $1D $43 $32, $1D $43 $3B
[Example]
] l [ ] m [ n 5 6 $ D 1 $
[Name] Ejector commands
[Format] ASCII GS e n [m] [l]
Hex 1D 65 n [m] [l]
Decimal 29 101 n [m] [l]
[Range] 0
≤
n
≤
3 , 5
≤
n
≤
8
[Description] This command checks tickets ejector :
n = 0
Ticket produced with defined number of steps (see command notes)
n = 1 Ejector motor off
n = 2 Ejector motor on
n = 3 ticket presenting with (3 x m) steps (1 step = 36 mm = 3 x 12 mm)
n = 5 ticket espulsion
n = 6 transmits ejector byte status