Custom Audio Electronics PRT 80, Руководство пользователя

Страница: 63 / 96

3. PRINTER FUNCTIONS
PRT 80 45 3-
0 4 $ B 1 $
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode to that in effect when
power was turned on.
[Notes] • The data in the receiver buffer is not cleared.
• The macro definitions are not cleared.
[Default]
[Reference]
[Example]
0 0 $ k n . . . 1 n 4 4 $ B 1 $
[Name] Set horizontal tab positions
[Format] ASCII ESC D n1...nk NUL
Hex 1B 44 n1...nk 00
Decimal 27 68 n1...nk 0
[Range] 1
≤
n
≤
255
0
≤
k
≤
32
[Description] Sets horizontal tab positions
•
n specifies the column number for setting a horizontal tab position calculated from the
beginning of the line.
•
k indicates the total number of horizontal tab positions to be set.
[Notes] • The horizontal tab position is stored as a value of [character width x n ] measured from
the beginning of the line. The character width includes the right-side character spacing
and double-width characters are set with twice the width of normal characters.
• This command cancels previous tab settings.
• When setting n = 8, the print position is moved to column 9, by sending
$09 .
• Up to 32 tab positions ( k = 32) can be set. Data exceeding 32 tab positions is pro-
cessed as normal data.
• Send [
n ] k in ascending order and place a 0 NUL code at the end. When [ n ] k is less
than or equal to the preceding value [ n ] k -1, the setting is complete and the data which
follows is processed as normal data.
• This command cancels all horizontal tab positions.
• The previously specified horizontal tab position does not change, even if the character
width is modified.
[Default] Default tab positions are set at intervals of 8 characters (columns 9, 17, 25, …) for Font
A when the right-side character spacing is 0.
[Reference] $09
[Example]
n 5 4 $ B 1 $
[Name] Turn emphasized mode on/off
[Format] ASCII ESC E n
Hex 1B 45 n
Decimal 27 69 n
[Range] 0
≤
n
≤
255