Custom Audio Electronics PRT 80, Руководство пользователя

Страница: 78 / 96

3. PRINTER FUNCTIONS
PRT 80 60 3-
Printable area
Left margin Printing area width
[Notes] • This command is enabled only if set at the beginning of the line.
• If the setting exceeds the printable area, the maximum value of the printable area is
used.
• If the left printing area width is greater than the printable area, the printing area
width is set at maximum value.
• The horizontal and vertical motion unit are specified by
$1D $50 . Changing the horizon-
tal or vertical motion unit does not affect the current left margin.
• The
$1D $50 command can change the horizontal (and vertical) motion unit.
• However, the value cannot be less than the minimum horizontal movement amount and
it must be in even units of the minimum horizontal movement amount.
[Default]
:. l o c 6 5 d n a 2 3 fI 0 = H n = L n
: .l o c 2 4 fI 0 = H n 4 1 = L n
[Reference]
[Example]
y x 0 5 $ D 1 $
[Name] Set horizontal and vertical motion units
[Format] ASCII GS P x y
Hex 1D 50 x y
Decimal 29 80 x y
[Range] x = 100, 200
y = 100, 200
[Description] Sets the horizontal and vertical motion units to 1/x inch and
1/y inch respectively.
When
x is set to 0, the default setting value is used.
When y is set to 0, the default setting value is used.
[Notes] • The horizontal direction is perpendicular to the paper feed direction.
• In standard mode, the following commands use
x or y , regardless of character rotation
(upside-down or 90° clockwise rotation):
Commands using x : $1B $20, $1B $24, $1B $5C, $1D $4C, $1D $57.
Commands using y : $1B $33, $1B $4A.
• This command does not affect the previously specified values.
• The calculated result from combining this command with others is truncated to the
minimum value of the mechanical pitch or an exact multiple of that value.
[Default] x = 200, y = 200
[Reference] $1B $20, $1B $24, $1B $5C, $1B $33, $1B $4A, $1D $4C, $1D $57
[Example]