Curtiss-Wright Parvus
DuraDBH-672
Introduction
MNL-0661-01 Rev A1
ECO-N/A
Effective: 25 January 2016
Page 9 of 34
Low
Power
ARM
‐
based
vetronics
computer
Multi-core NXP (Freescale) i.MX6-Quad ARM-based vehicle management computer with flexible
vetronics interfaces, including CANbus, serial, audio, video, digital I/O
o
i.MX6-Quad (ARM Cortex-A9 Core, 800 MHz, 4-core, 32-bit)
Operating system software: Linux®
Memory/storage:
o
2 GB RAM
o
8 GB on-board NAND Flash for storage memory/boot
Storage expansion:
o
mSATA Flash SSD (~up to 256GB)
o
Removable Flash storage option (roadmapped)
Standard I/O:
o
USB: 2 x USB 2.0
o
CAN: 2 x CANbus
o
Serial: 2 x RS-232/422/485, 1 x RS-232 (for external GPS input), 1 x RS-232 (console)
o
Network: 1 x GbE (+ 1 x connected internally to switch)
o
DIO: 6 x general-purpose digital I/O
o
Video: HDMI output
o
PCIe MiniCard I/O: 2 x module slots, 30 spare pins on DTL-38999 for add-on I/O
modules
o
1-PPS interface for external GPS (DAGR) or internal embedded GPS receiver (GB-
GRAM/Polaris™Link), SMA antenna interface and KEY-FILL interface
o
Internal host module site for Ground-Based GPS Receiver Application Module (GB-
GRAM)
Optional
I/O:
o
Optional stereo audio support
o
Optional pre-integrated Mini-PCIe I/O modules: MIL-STD-1553 / ARINC429 / other
application-specific I/O can be special ordered
Assured
PNT
Hub
Services
(optional)
Capable of distributing A-PNT services to connected devices over Ethernet network
Support for direct connection to external GPS input (i.e. DAGR) and 1 PPS input for PTP time
accuracy
Support for hosting optional government-furnished equipment (GFE) GB-GRAM GPS receiver
module (PolarisLink, SASSM or Military Code (M-Code))
Roadmapped option for integrated Chip Scale Atomic Clock (CSAC) and Inertial Measurement
Unit (IMU) for non-GPS augmentation to PNT service
Rugged
MIL
‐
STD
Design
Validated to meet harsh MIL-STD-810G conditions (temp, shock, vibration, humidity, altitude,
dust/water ingress)
Validated to meet MIL-STD-461F EMI/EMC (Conducted & Radiated Emissions & Susceptibility)
and MIL-STD-1275 & 704 Power Input and Transient Protections
-40 to +71C fanless extended temp operation with no moving parts
Corrosion-resistant, aluminum chassis sealed against water, dust (similar to IP67) with CARC
finish
Circular
MIL-DTL-38999
connectors
for reliable network connections
Filtered, transient-protected power supply for aircraft and vehicle use