Curtiss-Wright Parvus
DuraDBH-672
Management and software Interface
Overview
MNL-0661-01 Rev A1
ECO-N/A
Effective: 25 January 2016
Page 21 of 34
Remember that
bold
identifies what you should type exactly as shown;
bold italic
marks a parameter
you should provide, such as
<address>
.
Log
In
When the card powers on, the switch boots through RedBoot to the switch CLI and the following
messages are displayed on the console:
RedBoot> go
Parvus version 1.0.0
Press ENTER to get started
1. Press Enter one or more times until the Username: prompt appears.
Username:
1. Type
admin
and press Enter.
Username: admin
Password:
2. At the Password prompt, press Enter. (There is no default password.) This completes the login
sequence. The prompt changes to SWITCH-XXXX#.
Username: admin
Password:
SWITCH-XXXX#
At this point the admin user is operating at the highest privilege level, level 15. This means the admin has
full control over the switch and its configuration.
