Management and software Interface
Overview
Curtiss-Wright
Page 20 of 34
MNL-0661-01 Rev A1
ECO-N/A
Effective: 25 January
2016
Once a root password has been assigned you can connect to the Ethernet port via SSH. Due to security
consideration all other remote services (including network services such as FTP, TFTP, etc) are not
enabled.
S
WITCH
M
ANAGEMENT
I
NTERFACE
D
ESCRIPTION
The DuraDBH-672 management interfaces provide the network administrator with a set of comprehensive
management functions. The network administrator has a choice of two easy-to-use management
interfaces:
Serial CLI (command line interface)
Manages all switch features, including CLI enhancements.
Must be used to change the switch IP address from the factory default.
Can be used even if there is no network connectivity.
Provides brief help on syntax for each command.
Web GUI (graphical user interface)
Manages all switch features except the switch IP address and CLI enhancements.
Requires network connectivity.
Provides extensive help on functions and parameters
S
ERIAL
CLI
S
ETUP
1. Connect the DuraDBH-672 Switch serial management port to a serial port on the host PC.
2. Power-on the DuraDBH-672.
3. Open a terminal emulator on the host PC, such as TeraTerm or PuTTY on Windows, or Minicom on
Linux.
4. In the PC terminal emulation software, configure the serial port to 115200 baud, 8 data bits, 1 stop bit,
no parity, no flow control.
CLI
Q
UICK
S
TART
The instructions in this section provide step-by-step instructions on how to use the most critical CLI
commands. This section describes how to: