PROGRAMMING GUIDE
PG35
2 The ACCESS CODE screen will appear. The
default pass code is 1 2 3 4. Once the code is
entered, press OK. The MAIN MENU screen will
appear. The access code can be reset in the
Control Settings sub-menu, under Passwords.
Manual Programming Mode
1
5BQUIF XIJUF$VSUJTMPHPPOUIFUPVDITDSFFOmWF UJNFTUPFOUFSQSPHSBNNJOHNPEF
3 The MAIN MENU screen contains a series of sub-
NFOVJDPOT5IFJDPOTWBSZCBTFEPOUIFNPEFM
selected under the Model Select sub-menu. For
UIFCSFXFSUPPQFSBUFQSPQFSMZUIFNPEFMTFMFDUFE
must match the model series on the brewer model
OVNCFSMBCFMBGmYFEUPUIFPVUTJEFPGUIFNBDIJOF
(4&3"130(3"..*/((6*%&ø
NC
16
oz
12
oz
20
oz
16
oz
12
oz
20
oz
Status lights
Brew Buttons
Curtis logo
Home
Undo
Scroll
left/right
Return to
previous
Control symbols - all
symbols may not be
present at the same
time
Display view varies
with model
Touchscreen Control Module Overview
5IFUPVDITDSFFOUVSOTPOXIFOFWFSUIFSFBSUPHHMFTXJUDIJTPO5IFTZNCPMCVUUPOTPOUIFTDSFFODPOUSPM
PQFSBUJPOBOEQSPHSBNNJOH1SFTTJOHUIFPOTDSFFOTZNCPMTBOECVUUPOTXJUIZPVSmOHFSUJQBDUJWBUFTUIFWBSJPVT
functions. The default screen, as well as additional control buttons are shown below.
There are two methods for changing the default settings on G4 brewers. The settings can be programmed
NBOVBMMZVTJOHUIFCSFXFSUPVDITDSFFO TFFCFMPXPSBVUPNBUJDBMMZVTJOHUIF64# 6OJWFSTBM4FSJBM#VTEBUB
port on the side of the brewer (see
Automatic Programming - USB
).
