31 On brewers equipped with a power plug, connect the
power plug to the appropriate type of electrical outlet.
See the
ELECTRICAL SCHEMATIC
for the power supply
requirements.
Power Up the Brewer
32 Turn on the water supply valve.
33 Make sure that the circuit breaker supplying power to the
circuit is on.
34 Turn the toggle switch on the back of the water tower to
UIF0/QPTJUJPO5IFXBUFSUBOLXJMMTUBSUUPmMM8IJMFUIF
UBOLJTmMMJOHJOTQFDUUIFXBUFSTVQQMZMJOFGPSMFBLT
continued...
Connect the Power Cord
29 For brewers with a power connector mounted to the
back, connect a compatible IEC power cord (not
supplied) having a power plug that matches the
electrical outlet installed in the facility, and that meets
TQFDJmDBUJPOT
WARNING:
If the electrical outlet is not compatible
with the power plug, have it upgraded by a licensed
electrician. Do not modify the power plug. Do not use
an extension cord. Do not use a power cord/plug that
is damaged.
INSTALLATION INSTRUCTIONS
II12
SERA2, INSTALLATION INSTRUCTIONS
040220C
30 For brewers that will be connected to a junction box,
connect the power cable wires to the terminals inside the
junction box.
Figure 17 - IEC Power Cord Connection
Power cable
from brewer
Figure 18 - Junction Box Connection
Figure 19 - Power Plug Connection
Figure 20 - Power-Up
Back of water
tower
