Install the Hold Down Brackets
The water tower must be secured to the bottom of the
DBCJOFUVTJOHUIFIPMEEPXOCSBDLFUTBGmYFEUPUIFCPUUPN
edges of the chassis.
28
'BTUFOUIFXBUFSUPXFSCSBDLFUTPOUPUIFnPPS5IFSF
is one on the front and one on the side. If the brewer is
installed in a different location later, these brackets must
also be moved and installed with the water tower.
Install the Exhaust Lines
25
5IFXBUFSUPXFSJTFRVJQQFEXJUIUXPPVUMFUmUUJOHTUIBU
vent steam and condensation from the water tank inside
the chassis. Run the provided exhaust line tubing from
UIFTFmUUJOHTUPBESBJOUPESBJOPGGDPOEFOTBUJPO
NOTICE:
The exhaust line tubing must be installed
so that ends do not become submerged in water to
avoid backup.
INSTALLATION INSTRUCTIONS
II12
SERA2, INSTALLATION INSTRUCTIONS
040220C
Figure 15 - Water Supply Connection
Figure 16 - Hold Down Bracket Installation
Figure 14 - Exhaust Line Installation
Exhaust lines
attached to tank
RYHUÀRZ¿WWLQJV
Do not submerge
end of tubing in
water
Connect the Water Supply
26 Flush the water supply line prior to installation to purge
BJSBOEEFCSJTGSPNUIFXBUFSmMUFSBOEUVCJOH
27
$POOFDUUIFXBUFSTVQQMZMJOFUPUIFnBSFmUUJOHPOUIF
back of the brewer. Leave the water supply valve closed
until the power is connected.
WARNING:
Failure to install the hold down brackets
may cause the unit to tip over, especially when
installed in a mobile coffee counter. Injury might
result from spilled hot liquids or damage may occur
to the water tower itself.
