ALP48 Programming Manual
Page 16 of 16
©2009 Current Thinking Ltd
Use <L) and (R> on
Next
to scroll through the options:
Next
,
Exec
and
Quit
.
Next
will move cursor to Key switch ID.
Exec
will accept the new configuration for this key switch, and depending
on the function, it may display more configuration screens. This will be
explained below.
Quit
will move back to Engineering level menu without making any
changes.
Changing the key switch functionality will add a
Key switch changed
entry to the event log.
Reset
This function stops all latching messages currently playing when the key switch is
activated.
When saving this function, it will return you back to the Engineering level menu.
Protect
This function protects selected panel buttons. These protected buttons will only
be enabled if the key switch is activated.
A new display is shown when
Exec
is pressed.
To protect a panel button, press it. Its LED should light indicating that button is
to be protected.
Repeat the process until all buttons that require protecting are lit.
The cursor will default to
Save
. Use <L) or (R> to toggle this between
Save
and
Quit
. Press [A] to accept the selected choice.
Save
will store this new protected buttons and move back to the Engineering
level menu.
Quit
will discard all changes and move back to the Engineering level menu.
Emergency
This function is the same as
Protect
as detailed above, but with one extra
proviso:
When the key switch is activated, all paging from this microphone will be at
EMERGENCY level;
When the key switch is off, all paging from this microphone will be at PAGING
level.
This key switch functionality overrides the level of the microphone set in the
Set
Volumes
menu (as detailed above).
Message settings
This menu set the details for the pre-recorded messages that will be used. A
submenu will be displayed that allows each message to be configured.
Key switch 1 protect
Ensure LED is lit
to protect button
>Save