ALP48 Programming Manual
Page 7 of 7
©2009 Current Thinking Ltd
‘Alt’
Default for Message 3 on Store 2, configurable
'Lo '; Low priority microphone
'BGM' Background music
View fault status
This menu will show all the faults in the event log. It will filter out all other
events, showing faults only.
The display will show the following information:
The top line shows the event number and the total number of events. If this fault
occurred on a remote unit, it will display the address of this unit.
The second line shows the fault status, i.e. fault occurred or fault cleared.
The third line shows the type of fault.
The fourth line shows the time and date the fault occurred.
Press (R> to scroll forward through the faults, if there is more than one;
Press <L) to scroll backward through the faults, if there is more than one;
Press [A] to exit this menu.
This menu option is only shown if the
Faults
option is enabled in the
Setup
menu described later.
Login
This allows you to enter a PIN number to gain access to either Management (level
3) or engineer (level 4) menu items, the PIN for each level is different, and can
be changed with the correct access level.
<L) & (R> alter the selected value, [A] moves to the next digit.
An incorrect PIN will show an error message. Pressing any key will return you to
the User menu with Log in selected.
Back
This menu will return the user back to the previous menu level. In this case, it
will return the user back to the root menu.
Event 11/30-Node 2
Fault occurred
Unit not detected
09:03:13 18|02|09
Enter PIN to log in
-0***-
