ALP48 Programming Manual
Page 15 of 15
©2009 Current Thinking Ltd
then press the message reset button. When the alert message reaches the end,
it will stop playing in zone 1 only. It will still repeat in zones 2 and 3.
To stop a message from playing in all zones, then all zones must be selected then
the message reset button pressed.
Silence buzzer
This function will assign this button as a silence buzzer button.
This function will assign this button as a silence buzzer button. This button will
behave the same as selecting
Accept Faults
from the menu, as described
above. The buzzer will be silenced except for a single beep once every 15
seconds as long as there are faults current.
Select BGM
This function will assign this button as a Music button.
A button assigned as a music button toggles the ALP48 music zone select mode.
When pressed, the display will change to indicate you have entered music select
mode.
When you see this display, the zone button LEDs will light to show which zones
are set for music.
If the zone LED is off, then there is no music in that zone. Pressing that zone
button will enable music for all outputs in that zone. The zone LED will light
indicating music is now enabled in that zone.
Conversely, you can turn music off in a zone by pressing a zone button with its
LED lit.
When the user has finished selecting the music zones, press the music button
again to exit this mode and return the paging panel back to its normal mode.
Set key switch
This menu assigns a function to a key switch. There are 4 key switches. Each
are be individually configured.
Use <L) and (R> on the
Key switch ID
to the select the correct key switch.
Use <L) and (R> on
Function
to select the desired function. The three
functions are:
Reset
,
Protect
and
Emergency
.
*BGM zone selection*
Press zone button to
Set or clear music
Press music to exit
Set key switch
Key switch ID>1
Function:Reset
:Next