ALP48 Programming Manual
Page 14 of 14
©2009 Current Thinking Ltd
Pressing
Save
will save all outputs set to Y as part of this zone, so when this
zone is pressed during normal operation, it selects these outputs for audio.
When the new button configuration is saved, a
Btn config changed
entry is
added to the event log.
Configure message
This menu assigns the button as a message button. During normal operation, a
message button triggers the assigned message to play to the selected zones.
To assign a message to this button, toggle through the messages using <L) and
(R> when the cursor is on
Assign message
. Each message is shown as a 3
letter descriptor. These descriptors are configurable through the
Message
settings
menu (described later) if the default descriptors need changing. The
above example states that when button 9 is pressed, play the test message to all
selected zones.
When the new button configuration is saved, a
Btn config changed
entry is
added to the event log.
Special functions
This menu assigns a button to a special function.
Only 1 special function can be assigned to a button. If you toggle a function to
Yes
, and another function was already on
Yes
, then that other function will
automatically switch to
No
, leaving the current function on
Yes
.
When the new button configuration is saved, a
Btn config changed
entry is
added to the event log.
If this button is saved with all functions set to
No
, it disables this button and has
no effect when pressed.
Reset message
This function will assign this button as a message reset button.
Some messages are latching messages, i.e. that they will continue to repeat until
stopped from an external source. A reset message button will stop the message
repeat for the selected zones only.
For example, an alert message is playing in zones 1, 2 and 3. You wish to stop
the alert message in zone 1 only. You select zone 1 (LED should now be flashing
green and orange to indicate it is selected and an alert message is playing). You
Message button 9
Assign message>Tst
:Next
Function button 10
Reset message>No
Silence buzzer>No
Select BGM>Yes :Next
