ALP48 Programming Manual
Page 13 of 13
©2009 Current Thinking Ltd
If they are different, a warning message will be displayed. Press any key to return
to the change engineer PIN menu.
Button config
This menu allows the user to configure the panel buttons. As each button can
have one of multiple functions, it is necessary to first determine which function
the button is to have.
A submenu is displayed of the different button functions.
Button 1
Back
>Configure zone
Configure message
Special function
Button number
To configure a panel button, first that panel button MUST be pressed. The button
number will be displayed on the top line, and the button LED will show green,
indicating that that is the button to be configured.
Once the correct panel button has been selected, use the <L) and (R> navigation
buttons to scroll through this menu to select which function this panel button is to
perform.
Configure zone
This menu assigns this button to be a zone select button. All configured DCA4s
are shown in a list.
Button 1 Next
1| 1>Y 2:N 3:N 4:N
2| 1:N 2:N 3:N 4:N
3| 1:N 2:N 3:N 4:N
Each DCA4 is shown with 4 audio outputs. The network address of the DCA4 is
shown down the left side. The output number is shown across the line.
For example,
1| 1>Y 2:N 3:N 4:N
means that this line refers to DCA4
address 1. The cursor is on output 1, and it is set to be included in this zone.
Outputs 2, 3 and 4 are not to be included in this zone.
To include a DCA4 output in the zone select list, press either <L) or (R> to toggle
the option for that output to Y. To deselect that output from the zone select list,
toggle the option to N. A DCA4 will only show in this menu if it has been
configured in the network setup (see later for details).
Press [A] to scroll through the outputs. The cursor scrolls from output 4 of the
current DCA4 to output 1 of the next DCA4. If on output 4 of the bottom DCA4,
the cursor scrolls to
Next
. Each page shows up to 3 DCA4s. If there are more
than 3 DCA4s on the system, then this menu has multiple pages. To get to the
next page, press [A] on
Next
.
