Stopping conditions and recovery steps |
JetScan
®
MPX 8200 strapping and corner module
| 19
4. Remove the jammed document and any document that is nearby and at risk of
causing an additional jam. Use care when removing documents in the strap head
area.
Burn hazard. Hot surface below strap head.
Do not touch.
See the
section for more information.
5. Press
Jog Forward
if the button is shown on the screen to move (jog) the transport
path forward to free a document. Inspect the surrounding area for obstructions or
foreign objects and remove them.
6. Press
Prev
(previous) or
Next
in the bottom right corner of the screen to select the
next jam and repeat steps 4-5. Continue this process until all jams are cleared.
7. Close the upper-front access door and the lower paper-roll access door.
Once
Flush
is pressed, the screen identifying the jam location disappears, and
it cannot be recalled.
8. Press
Flush
to ensure the transport path is clear. Motors momentarily run and then
automatically time out and stop.
9. A
Strapper Reset
screen appears if a reset procedure is required. Press
Reset
. The
screen refreshes when the procedure is complete. Press
OK
to continue.