CUMMINS ALLISON JetScan MPX 8200 Скачать руководство пользователя страница 13

Страница: 13 / 28

Configuring strap length and printing |

JetScan

MPX 8200 strapping and corner module

| 13

b. Set the Bin Limit to

straps. Press the button to select the limit. The

limit can be different for each strapping module.

c. Set the Strap Face to

(portrait side up in strapper) or

Down

(portrait side

down in strapper). Repeatedly press the button and stop on the desired facing.

d. If desired, press

Apply to All Strappers

to use the selected settings on all

configured strapping modules.

5. Press

Save

to save all changes. A successful save confirmation screen appears. To

return to the main-processing screen, do the following:

a. Press

to prompt the

Configure Sort Mode

screen.

b. Press

to prompt the

Select Sort Mode To Configure

screen.

c. Press

to prompt the

Sort Setup

tab screen.

d. Press the

Exit Setup

tab to prompt the

Menu

tab screen.

e. Press the

Processing

tab to prompt the main-processing screen.

To print a custom message, date, time and operator ID on strapping paper:

1. Press the

Menu

tab on the main-processing screen.

2. Press

Setup

on the

Menu

tab screen.

3. Press

Processing Type Setup

to prompt the

Settings

screen below.

The Machine Setup and Backup/Restore tabs are for use only by trained
Cummins Allison service technicians.

4. Press

Strap Print

to prompt the

Strap Print Settings

screen.

5. Press

Off

to enable or disable printing of the following information on

strapping paper: Text (custom message), Date, Time and Operator ID. Operator ID
refers to the user who is signed onto the system during the strapping operation.

6. Press

Customize

to prompt a keyboard screen and type a custom alpha-numeric

message.

When complete, do one of the following:

• Press

to save the custom message.

• Press

Cancel

to delete and eliminate the custom message.

The

Strap Print Settings

screen appears.

7. The maximum length for all fields

combined – Text (custom message),
Date, Time and Operator ID – is 40
characters.

When the 40-character limit is

exceeded, the screen at right appears.

Содержание JetScan MPX 8200





























Результаты поиска

Содержание JetScan MPX 8200

Отзывы:

Похожие инструкции для JetScan MPX 8200

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetScan MPX 8200, Руководство пользователя

Результаты поиска

Содержание JetScan MPX 8200

Отзывы:

Похожие инструкции для JetScan MPX 8200

Бренды по названию

Популярные бренды